The 555 Fan

1 Assembling the case.

Build It

  • Put together part of the case as shown below.

Step1.jpg Step2.jpg Step3.jpg Step4.jpg

  • Next you'll need to attach your finished PCB to the mounting plate as you have done previously, this can be seen below.

PCBwiring2.jpg

  • The motor now needs to be mounted using a cable tie and the panel needs to be glued in place.

PCB_to_body.jpg

  • Attaching the fan blade come next.
  • Be careful not to push the fan blade to far back on the motor.

Fitfan.jpg

  • This will then need to be glued in place onto your project.
  • This is what your completed project should look like.

Complete.jpg Complete_side.jpg

Badge It

  • Take photographs of your fan (without the front cover) from front, side, top and perspective elevations.
  • Your badge will be awarded according to the quality of your work.