An Introduction to Mechanisms

1 Modelling the Cam Mechanism

Learn It

  • Below you'll find drawings of each of the parts of the Cam mechanism that you are manufacturing.
  • None of the parts are to scale, so read the dimensions carefully

Follower Guide

guide.png

Right-hand side

right.png

Left-hand side

left.png

Base

base.png

Corner support

support.png

Follower axle

short-axel.png

Main axle

long-axel.png

Follower Cap

follower-cap.png

Badge It - Silver

  • After creating all the parts in SolidWorks. Upload one screenshot of the follower guide.
  • Adapt two of the Cams you have made, so that they have crosses in the centre to fit the axle.

Badge It - Gold

  • Create an Assembly of your mechanism. The other 5 pieces needed are in the open drive > Design Engineering > Year 7 > 4 - Mechanisms.
  • These need to be saved into your area before you can begin assembling the frame.
  • The image below should help you understand how the pieces fit together.

exploded.gif

  • Also there is a video to help.

Badge It - Platinum

  • Use the animation tools to create an animation of your working mechanism.
  • HINT - there is a special type of mate called a cam mate, see if you can use it to mate your cams to your followers.

animated.gif